Chevrolet Equinox 2006 Especificaciones descargar pdf (Pagina 378)

6. Press the clip (A)

on the electrical

connector when

replacing the

low-beam or

high-beam bulb, then

pull it straight off.

Turn the bulb retaining ring (B)

counterclockwise to remove it and then

pull the bulb assembly straight out.

For all other bulbs, turn the socket

counterclockwise and pull it out from the

headlamp assembly. Pull the bulb straight

out from the socket.

7. Push the new bulb into the socket and

reinstall the socket into the headlamp

assembly by turning it clockwise.

For the low-beam or high-beam bulb, install

the new bulb being sure to align the notches

in the bulb with the notches in the headlamp

assembly.

8. Place the retaining ring over the bulb/socket

and turn it clockwise to tighten it and secure

the bulb/socket.

9. Connect the electrical connector.

10. Reverse Steps 1 through 5 to reinstall the

headlamp assembly.

Taillamps, Turn Signal, Stoplamps

and Back-up Lamps

A. Turn Signal

Lamp/Taillamp

B. Stoplamp/Taillamp

C. Sidemarker Lamp

D. Back-Up Lamp

378

1 2 ... 373 374 375 376 377 378 379 380 381 382 383 ... 491 492

Comentarios a estos manuales

Sin comentarios