Chevrolet 2010 HHR Manual de usuario descargar pdf (Pagina 149)

100

101

Compass Calibration

If after a few seconds the display does not show a

compass direction, (N for North for example), there may

be a strong magnetic ﬁeld interfering with the compass.

Interference can be caused by a magnetic antenna

mount, note pad holder, or similar object. If CAL appears

in the compass window, the compass may need to be

reset or calibrated.

To calibrate the compass:

1. Make sure CAL is displayed. If CAL is not displayed,

press and hold the compass button until CAL

displays.

2. While CAL displays, drive the vehicle in circles at

5 mph (8 km/h) or less until the display reads a

direction.

Compass Variance

The mirror is set to zone eight. If you do not live in zone

eight or drive out of the area, the compass variance

needs to be changed to the appropriate zone.

To adjust for compass variance:

1. Find the current location and variance zone number

on the following zone map.

2. Press and hold the compass button until a Z and a

zone number displays.

3. Once the zone number displays, press the compass

button repeatedly until the correct zone number is

reached. If CAL displays in the compass window,

the compass may need calibration. See “Compass

Calibration” listed previously.

3-41

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 463 464

Comentarios a estos manuales

Sin comentarios

Chevrolet 2010 HHR Manual de usuario Pagina 149

Comentarios a estos manuales

Relacionado con productos y manuales para Carros Chevrolet 2010 HHR